Winchester
model 97
Actual load times may take a while as these scanned pictures may be large, &
depending on the speed of your computer & server
Part numbers listed above & below are factory part numbers, as shown in this illustration from factory 1954 parts catalog.
Parts listed below
in RED
bold letters
are
the parts that we currently make & have for sale
other numbers are for
identification purposes only.
| 297 | Action Slide, Take-down (12 & 16ga) | 11397 | Extractor Plunger RH |
| 1597 | Action Slide Handle (12 & 16ga) | 11497 | Extractor Plunger Spring RH |
| 2597 | Action Slide Sleeve Screw Cap | 11597 | Extractor Pin LH (12ga) |
| 2697 | Action Slide Lock | 11697 | Extractor Pin LH (16ga) |
| 2797 | Action Slide Lock Joint Pin | 11797 | Ejector Spring (12ga) |
| 2897 | Action Slide Lock Joint Pin Stop Screw | 11897 | Ejector Spring (16ga) |
| 2997 | Action Slide Lock Spring | 11997 | Ejector Spring Screw |
| 3097 | Action Slide Lock Spring Screw | 12097 | Ejector Pin (12ga) |
| 3197 | Action Slide Lock Release Plunger | 12197 | Ejector Pin (16ga) |
| 3297 | Action Slide Lock Release Plunger Pin | 12297 | Extension, Take-down |
| 3397 | Action Slide Lock Release Plunger Pin Spring | 12397 | Extension Stop Screw, Take-down |
| 3497 | Action Slide Spring | 12497 | Firing Pin (12ga) |
| 3597 | Action Slide Hook | 12597 | Firing Pin (16ga) |
| 3697 | Action Slide Hook Screw | 12697 | Firing Pin Lock |
| 3312 | Adjusting Sleeve, Take-down | 12797 | Firing Pin Lock Screw |
| 3312-1 | Adjusting Sleeve, Take-down (1/8" heavy draw) | 12897 | Firing Pin Lock Spring |
| 3312-2 | Adjusting Sleeve, Take-down (3/8" heavy draw) | 12997 | Firing Pin Stop Pin |
| 3312-3 | Adjusting Sleeve, Take-down (1/2" heavy draw) | 13097 | Guard Bow |
| 3312-4 | Adjusting Sleeve, Take-down (3/4" heavy draw) | 13197 | Hammer Complete |
| 3312-5 | Adjusting Sleeve, Take-down (1" heavy draw) | 13297 | Hammer Pin |
| 3312-9 | Adjusting Sleeve, Take-down (1/4" heavy draw) | 13397 | Hammer Stirrup |
| 3897 | Adjusting Sleeve Lock, Take-down | 13497 | Hammer Stirrup Oin |
| 3997 | Adjusting Sleeve Lock Screw, Take-down | 13597 | Mainspring |
| 4197 | Barrel, Plain, Take-down (12ga specify choke & length) | 13697 | Mainspring Strain Screw |
| 4297 | Barrel, Plain, Take-down (16ga specify choke & length) | 13797 | Mainspring Pin |
| 4597 | Barrel Chamber Ring, Take-down (12ga) | 14097 | Magazine tube, Take-down (12ga) |
| 4697 | Barrel Chamber Ring, Take-down (16ga) | 14197 | Magazine tube, Take-down (16ga) |
| 4797 | Barrel Chamber Ring Retaining Screw (2 required) | 14597 | Magazine Band, Take-down (12ga) |
| 5497 | Breech Bolt (12ga) | 14697 | Magazine Band, Take-down (16ga) |
| 5597 | Breech Bolt (16ga) | 14897 | Magazine Band Bushing Screw, Take-down (12ga) |
| 6297 | Butt Stock Complete | 14997 | Magazine Band Bushing Screw, Take-down (16ga) |
| 7097 | Butt Stock Bolt & Washer | 15097 | Magazine Band Bushing, Take-down (12ga) |
| 7397 | Butt Plate | 15197 | Magazine Band Bushing, Take-down (16ga) |
| 7597 | Butt Plate, Metal | 15497 | Magazine Plug, Take-down |
| 9112 | Butt Plate Screw (2 required) | 15597 | Magazine Plug Screw, Take-down |
| 7797 | Cartridge Guide (12ga) | 15697 | Magazine Plug Stop, Take-down (12ga) |
| 7897 | Cartridge Guide (16ga) | 15797 | Magazine Plug Stop, Take-down (16ga) |
| 7997 | Cartridge Guide Friction Spring | 15897 | Magazine Stop, Take-down (12ga) |
| 8097 | Cartridge Guide Rivet | 15312 | Magazine Lock Pin & Spring, Take-down (12ga) |
| 8197 | Cartridge Guide Stop Screw | 15512 | Magazine Lock Pin Spring, Take-down (12ga) |
| 8297 | Cartridge Stop & Spring, RH (12ga) | 16397 | Magazine Spring |
| 8397 | Cartridge Stop & Spring, LH (12ga) | 16597 | Magazine Follower, Take-down (12ga) |
| 8497 | Cartridge Stop & Spring, RH (16ga) | 16697 | Magazine Follower, Take-down (16ga) |
| 8597 | Cartridge Stop & Spring, LH (16ga) | 17697 | Receiver Shank |
| 9097 | Cartridge Stop Spring | 16897 1/2 | Spanner Wrench, Forearm |
| 9197 | Cartridge Stop Screw, RH | 17797 | Sear |
| 9297 | Cartridge Stop Screw, LH | 17897 | Sear Pin |
| 9597 | Carrier, Standard (12ga) | 17997 | Sear Spring |
| 9697 | Carrier, Standard (16ga) | 18097 | Sear Spring Screw |
| 10797 | Carrier Pin | 18197 | Trigger |
| 10897 | Carrier Pin Stop Screw | 18297 | Trigger Pin |
| 10997 | Extractor, RH (12ga) | 18397 | Trigger Spring |
| 11097 | Extractor, RH (16ga) | 18497 | Trigger Spring Screw |
| 11197 | Extractor, LH (12ga) | 18712 | 3 Shell Plug |
| 11297 | Extractor, LH (16ga) | 18712 | Front Sight, Standard (81-A) |
|
Parts listed below are for the older solid frame firearms |
|||
| 2497 | Action Slide Handle Screw, (Old Style 3 screw FA) | 9397 | Cartridge Stop Screw RH, (Old Style, on side of action) |
| 9397 | Cartridge Stop Screw RH, (Old Style, on side of action) | . | . |
For prices of parts that we do make for this model, click
here for Link to Winchester 97 Parts
All information appearing on this page, Copyright © 1996-2006 Wisner's Inc.,
with credit given for original illustrations.
All Rights Reserved
Back to Exploded Views
originated 11-10-05 & Last Updated
08-09-2006
LeeRoy Wisner