Winchester Model 88
Actual load times may take a while as these scanned pictures may be large, &
depending on the speed of your computer & server
The above illustration taken from original factory parts list dated 1958
Parts listed below
in RED
bold letters
are
the parts that we currently make & have for sale
other numbers are for
identification purposes only.
| 188AB | Barrel with Receiver, Rifle 243 Winchester | 4088 | Hammer Catch Pin |
| 288AB | Barrel with Receiver, Rifle 308 Winchester | 4188 | Hammer Catch Spring |
| 388AB | Barrel with Receiver, Rifle 358 Winchester | 4288 | Hammer Lock |
| 488 | Bolt Complete | 4388 | Hammer Pin |
| 588 | Bolt Stripped | 4488 | Hammer Spring |
| 688 | Bolt Sleeve | 4588 | Hammer Spring Guide |
| 788 | Bolt Sleeve Lock | 4688 | Hammer Spring Guide Rod |
| 888 | Bolt Sleeve Lock Pin | 4788 | Hammer Spring Guide Rod Pin |
| 2188 | Butt Plate | 4888 | Magazine Complete, (4 cartridges) 243, 308 |
| 9112 | Butt Plate Screw (2 required) | 4888A | Magazine Complete, (3 cartridges) 284 |
| 988 | Ejector | 5088 | Magazine Follower Assy, w/spring 243, 308 |
| 1088 | Ejector Pin, Firing Pin Retaining Pin | 5088A | Magazine Follower Assy, w/spring 284 |
| 1188 | Ejector Spring | 5288 | Magazine Lock |
| 1288 | Extractor, (specify serial number) | 5388 | Magazine Housing |
| 1388 | Extractor Plunger | 5488 | Magazine Lock Pin |
| 1488 | Extractor Spring | 5888 | Magazine Lock Spring |
| 1588 | Firing Pin | 213102 | Pistol Grip Cap |
| 1688 | Firing Pin Spring | 214102 | Pistol Grip Cap Insert |
| 1988 | Finger Lever | 45102A | Pistol Grip Cap Screw |
| 2088 | Finger Lever Pin | 5888 | Rear Link LH |
| 2288 | Finger Lever Spring | 5988 | Rear Link RH |
| 2388 | Forearm Escutcheon | 6088 | Rear Link Pin |
| Fig 38 | Forearm Swivel Complete | 4002 | Rear Sight, Lyman #16A |
| 2688 | Forearm Screw | 6288 | Receiver |
| 2788 | Forearm Stud | 7688 | Receiver Spacer |
| 2888 | Front Link LH | 7788 | Receiver Spacer Screws (2 required) |
| 2988 | Front Link RH | 6388 | Recoil Block Screw |
| 3088 | Front LinkPin | 6488 | Recoil Block Screw Washer |
| 103E | Front Sight | 6588 | Safety |
| 103H | Front Sight, (.260 high 284 Winc) | 6688 | Safety Spring |
| 3279 | Front Sight Cover | 6888 | Safety Spring Plunger |
| 12970C | Telescope Sight Base Plug Screw (6 required) | 3259 | Sling Strap, 1" |
| 3488 | Guard | 6988 | Stock with Butt Plate & 2 Screws, (rifle) (NOTE) |
| 3588 | Guard Latch | 6988B | Recoil Block |
| 3688 | Guard Latch Spring | 13470 | Stock Swivel Bow, 1" |
| 3788 | Guard Latch Spring Abutment | 7188 | Trigger |
| 3888 | Hammer | 7288 | Trigger Pin |
| 3988 | Hammer Catch | 7388 | Trigger Spring |
|
Model 88A & 88H, Rifle & Carbine, Same as regular 88 except as Follows |
|||
| 4400 | Barrel Band, Carbine | 1288A | Extractor (specify serial number) |
| 200 | Bolt Complete | 1988A | Finger Lever Guard Assembly |
| 300 | Bolt | 1300 | Firing Pin |
| 400 | Bolt Sleeve | 1400 | Firing Pin Spring |
| 788A | Bolt Sleeve Lock | 4500 | Forearm Screw, Carbine |
| 700 | Bolt Sleeve Pin | 4600 | Forearm Swivel, Carbine |
| 900 | Ejector (2) each | 3500 | Operating Slide Pin |
| 1000 | Ejector Pin | 6288A | Receiver |
| 1100 | Ejector Spring (2) each | 7588A | Stock with Butt Plate, Carbine (rifle) |
| . | . | . | . |
NOTE
Guns with serial numbers below 82,900 require new recoil block
For prices of parts that we do make for this model, click here
for Link to Winchester 88 Parts
All information appearing on this page, Copyright © 1996-2006 Wisner's Inc.,
with credit given for original illustrations.
All Rights Reserved
Back to Exploded Views
Originated 11-03-05, Last Updated 08-09-2006
LeeRoy Wisner