Winchester model 1885
"High Wall"
Actual load times may take a while as these scanned pictures may be large, &
depending on the speed of your computer & server
The Above illustration taken from Frank de Haas Single Shot
Rifles & Actions book, but the numbers HAVE BEEN
CHANGED to match factory numbers.
The numbers on this illustration reflect all Winchester numbers that
utilize the last 2 designating the model number of the firearm. So,
a #52 here equals Winchester #5285. There are basically 3 different
variations of this firearm, (1) the Hi Wall, (2) the Low Wall, & the Windor
Musket.
The omitted numbers are in question, at least temporally, as there was never a
factory exploded view like this & old numbers are hard to track down.
Parts listed below
in RED
bold letters
are
the parts that we currently make & have for sale
other numbers are for
identification purposes only.
| 1 thru 11 | Barrel | 27485 | Knock-Off Stop Pin |
| 29885 | Breech Block | 27585 | Knock-Off Operating Pin |
| 2385 | Extractor, (specify caliber) | 27685 | Knock-Off Spring |
| 5285 | Finger Lever | 27785 | Knock-Off Spring Pin |
| 5685 | Finger lever pin | 27885 | Knock-Off Spring Screw |
| 5785 | Finger Lever Pin Stop Screw | 27985 | Knock-Off Spring Screw Nut |
| 27085 | Finger Lever Plunger | . | Lower Tang |
| 27185 | Finger Lever Plunger Spring | 14485 | Lower Tang Screw (wood screw) |
| 2585-B | Firing Pin, Black Powder (.122 dia tip) | 13085 | Link |
| 2585-S | Firing Pin, Smokless Powder (.074 dia tip) | 21285-S | Link Pin, (short) |
| 2585-RF | Firing Pin, 22 Rim Fire | 21285-L | Link Pin, (long) |
| 25885 | Firing Pin Stop Screw | 51185 | Peep Sight Plug Screw |
| 6385-F | Hammer O/S (for flat leaf mainspring type) | 8285 | Receiver with Tang |
| 6385-C | Hammer N/S (for rat-trap coil mainspring type) | 23485 | Side Tang Screws (2 required) |
| 44085 | Hammer Fly | 11685 | Sear |
| 44185 | Hammer Fly Pin | 11785 | Sear Pin |
| 13185 | Hammer Pin | 11885 | Sear Spring |
| 14385-F | Hammer Spring, (flat mainspring) | 11985 | Sear Spring Screw |
| 14385-C | Hammer Spring (rat-trap coil mainspring) | 8785 | Trigger |
| 27285 | Knock-Off | 8885 | Trigger Pin |
| 27385 | Knock-Off Pin | 9185 | Upper Tang Screw |
| . | . | . | . |
For prices of parts that we do make for this model, click here for Link to Winchester Hi Wall parts
All information appearing on this page, Copyright © 1996-2006 Wisner's Inc.,
with credit given for original illustrations.
All Rights Reserved
This page under construction
Back to Exploded Views
Originated 11-04-05,Last Updated 08-09-2006
LeeRoy Wisner