Winchester Pre 64 model 70 Rifle &
Featherweight
Actual load times may take a while as these scanned pictures may be large, &
depending on the speed of your computer & server
The above illustration taken from original factory parts
list dated 1958
Parts listed below
in RED
bold letters
are
the parts that we currently make & have for sale
other numbers are for
identification purposes only.
For any part number that has X in the start of it, means it is restricted to being installed in our shop only.
| 170 | Barrel, Standard (specify caliber) | 7970E | Forearm Adjustment Bow Complete |
| 170A | Barrel, Featherweight (specify caliber) | 7970G | Forearm Adjustment Swivel Bow (round head) |
| 170B | Barrel, Heavy, (Target & Varmint) (specify caliber) | 7970H | Forearm Adjustment Swivel Bow Base (with bow) |
| 170C | Barrel, Bull (specify caliber) | 7970L | Forearm Adjustment Screw Escutcheon |
| 170D | Barrel, African | 7970M | Forearm Adjustment Base Complete |
| X2170 | Breech Bolt, (standard bolt face) | 8070 | Guard Bow (trigger guard to some of you) |
| X2270 | Breech Bolt, (magnum bolt face) | 8070 | Guard Bow Complete |
| X2370 | Breech Bolt, (22 Hornet) | 8170 | Guard Bow Screw, front |
| X2170A | Breech Bolt Complete, (standard bolt face) | 8270 | Guard Bow Screw, Rear (thin head) |
| X2470B | Breech Bolt Complete, (magnum bolt face) | 8370 | Magazine (7x57, 270 Win, 30-06) |
| X2470C | Breech Bolt, (22 Hornet) | 8470 | Magazine (250 Savage) |
| X2570 | Breech Bolt Sleeve | 8570 | Magazine (220 Swift) |
| X2670 | Breech Bolt Sleeve, Complete | 8670 | Magazine (257 Roberts, 243 & 308 win) |
| 2770 | Breech Bolt Sleeve Lock | 8770 | Magazine (300 & 375 H&H) |
| 2870 | Breech Bolt Sleeve Lock Spring | 8770A | Magazine (458 Win) |
| 2790 | Breech Bolt Sleeve Lock Pin | 8770B | Magazine (264 & 338 Win Mag) |
| 3070A | Bolt Stop | 8770Spl | Magazine (300 Weatherby Mag) |
| 3170 | Bolt Stop Plunger | 8870 | Magazine Adapter with Back (22 hornet) |
| 3270 | Bolt Stop Plunger Spring | 8970 | Magazine Complete (22 Hornet) |
| 4870 | Butt Plate Metal for Reg. & Super grade Stock | 9070 | Magazine Spring (270, 30-06 & Magnums) |
| 4870A | Butt Plate, Featherweight | 9170 | Magazine Spring (250 Sav, 257 R, 220 S, 243 & 308) |
| 4970 | Butt Plate Screws for above, (2 required) | 9270 | Magazine Spring (7X57) |
| 5070 | Butt Plate Metal for Marksman Stock | 9370 | Magazine Spring (22 Hornet) |
| 5170 | Butt Plate Screws for Marksman Stock (2 required) | 9370A | Magazine Cover Only (steel) |
| 5270 | Cartridge Pusher, (22 Hornet) | 9370B | Magazine Cover Only, Featherweight (aluminum) |
| 5370 | Cartridge Pusher Pin, (22 Hornet) | 9470 | Magazine Cover Complete |
| 5470 | Cartridge Pusher Spring, (22 Hornet) | 9470C | Magazine Cover Complete, Featherweight (aluminum) |
| 5570 | Extractor, Standard calibers, (30-06 etc.) | 9470A | Magazine Cover Complete, Super Grade |
| 5670 | Extractor, Magnum calibers, (300 & 375 H&H etc.) | 9470D | Magazine Cover Complete, Super, (Featherweight) |
| 5770 | Extractor (22 Hornet) | 9470B | Magazine Cover Complete, (22 hornet) |
| 5570A | Extractor (35 Remington) | 9570 | Magazine Cover Catch |
| 5870 | Extractor Ring (for 7x57 thru 458 length cases) | 9670 | Magazine Cover Catch Pin |
| 5970 | Extractor Ring & Bolt Stop Extension (22 Hornet) | 9770 | Magazine Cover Catch Spring |
| 6070 | Extractor Ring & Bolt Stop Extension (250 Sav & 35 Rem) | 9870 | Magazine Cover Hinge Plate |
| 6170 | Extractor Ring & Bolt Stop Extension (220 Swift / 243-308) | 9970 | Magazine Cover Hinge Plate Screw |
| 6270 | Ejector (for 7x57 thru 458 length cases) | 10070 | Magazine Cover Hinge Plate Pin |
| 6370 | Ejector #5 (for 250 Sav & 35 Rem) | 10170 | Magazine Follower (270 Win, 7X57, 30-06) |
| 6470 | Ejector #4 (for 220 Swift / 243-308) | 10270 | Magazine Follower (250 S, 257 R, 220 S, 243 & 308) |
| 6470A | Ejector #4 (for 22 Hornet) | 10370 | Magazine Follower (22 Hornet) |
| 6570 | Ejector Rivet (for 22 Hornet) | 10570 | Magazine Follower (300 & 375 H&H) |
| 6670 | Ejector Pin (all calibers except 22 Hornet) | 10570A | Magazine Follower (264, 338 & 458 magnums) |
| 6770 | Ejector Spring (all calibers except 22 Hornet) | 11070 | PG Cap & Screw, (Super Grade) |
| 6870 | Ejector Spring ( 22 Hornet) | 11170 | Safety Lock |
| 6970 | Ejector Complete, (specify caliber) | 11270 | Safety Lock Plunger |
| X7070 | Firing Pin | 11370 | Safety Lock Plunger Spring |
| 7270 | Firing Pin Spring (all calibers except 22 Hornet) | 11470 | Safety Lock Plunger Plunger Spring |
| 7370 | Firing Pin Spring (22 Hornet) | 11370A | Safety Lock Stop Pin |
| 7470 | Firing Pin Sleeve | X11470 | Sear |
| 7570 | Firing Pin Stop Screw | 11570 | Sear Pin |
| 7670 | Forearm Tip Blank (black plastic, not fitted) | 11670 | Sear Spring |
| 7770 | Forearm Stud | 11770 | Stock Cross Bolt Complete (458 Magnum) |
| 7870 | Forearm Stud Screw | X11870 | Trigger |
| 7970 | Forearm Stud Screw Escutcheon | 11970 | Trigger Pin |
| 7970A | Forearm Adjustment Base | 12070 | Trigger Spring |
| 7970B | Forearm Adjustment Base Screw (flat head) | 12170 | Trigger Stop Screw |
| 7970C | Forearm Adjustment Base Screw Escutcheon | 12270 | Trigger Stop Screw Nut |
| 7970D | Forearm Adjustment Base (Bakelite) | 12370 | Trigger Spring Adjusting Nut (2 req) |
| . | . | . | . |
For prices of parts that we do make for this model, click here for
Link to Winchester 70 Parts
NOTE -- This pre - 64 model was ONLY made in a RH LONG ACTION
All information appearing on this page, Copyright © 1996-2006 Wisner's Inc.,
with credit given for original illustrations.
All Rights Reserved
Back to Exploded Views
Last Updated 11/17/07
J Wisner