Winchester  model 1890, 90, 06, 62, 62A

Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

The family of models 1890, 90, 06, 62 & 62A will use many parts interchangeably, with the listings shown below.   Most of the action parts are the same except the 62A which uses a coil type mainspring.  The 1890 is just a earlier version of the model 90, these two had both round & octagon  24" barrels, & curved steel butt plates, with special order 1/2 PG butt stocks.  The 1890 & 90 could be had in either 22 Short, 22 long or 22 WRF.   The 06 had a shorter 20" round barrel & a hard rubber butt plate & was the first that allowed the use of 22 S, L, or LR interchangeably, with the later models then using the same system. The model 62 was a more modern version of the 90 with fuller butt stock & forearm (action slide handle) & a "improved firing pin" that didn't work as planned & reverted back to the 90 type when the 62A came along .  

Also it seems that depending on the year of parts list you look at, there may be different numbers for the same model, especially the 90 & 06.  Where possible we try to use the latest part number IF it happens to interchange, as this number possibly may be the one most people find when looking elsewhere.  Winchester part numbers reflect the last 2 digits which equal the model number of the firearm, & sometimes a screw may interchange with a totally different model.   Where we list multiple part numbers but some are in BLUE, these are actually the same part, but we list what we make in RED, again same part as in the blue.

When specifying round capacity of outside magazine tubes, this just means the loading port in the tube is compatible with accepting that many rounds.  The 1890 & 90 & 06's had this port closer because of a shorter forearm.   Our #4762AS was developed to be a universal outside tube & will fit all models.  The 4962A inside magazine tube will fit all models in 22 RF caliber.

Parts listed below in RED bold letters are the parts that we currently make & have for sale 
other numbers are for identification purposes only.

For prices of parts that we do make for this model, click here for Link to Winchester RF Pump Parts 

All information appearing on this page, Copyright © 1996-2006 Wisner's Inc., with credit given for original illustrations.  All Rights Reserved

This page under construction

     Back to Exploded Views  

Originated, 11-14-05, Last Updated 12-26-2006
LeeRoy Wisner