Winchester pre-64 model 94 Carbine
Top Eject
Actual load times may take a while as these scanned pictures may be large, &
depending on the speed of your computer & server
Part numbers listed above & below are factory part numbers. In this illustration from a Winchester 1978 catalog, will be correct for guns made between about 1936 to 1964. These parts except the stocks, barrel & magazine length for the rifle will still fit many of the regular older rifles. The few parts that have a number that has an X suffix behind it indicates that the X part is identical & is used on the post 64 version.
Parts listed below
in RED
bold letters
are
the parts that we currently make & have for sale
other numbers are for
identification purposes only.
| 194 | Barrel, Carbine with ramp. full mag, 30-30 20" | 4794 | Link Pin |
| 794 | Barrel, Carbine with ramp. full mag, 32 WS 20" | 4894 | Link Pin Stop Screw |
| 494 | Breech Bolt with Extractor & Pin | 5094 | Locking Bolt, Standard |
| 3394 | Butt Stock, Carbine | 5094.005 | Locking Bolt, .005 Oversize |
| 4394 | Butt Plate, Carbine | 5094.010 | Locking Bolt, .010 Oversize |
| 4494 | Butt Plate Screws | 5094.015 | Locking Bolt, .015 Oversize |
| 1294 | Carrier (Improved Version) | 10394 | Lower Tang, Straight Grip |
| 1394 | Carrier Screw (2 Required) | 5794 | Magazine Follower |
| 1494 | Carrier Spring | 11394 | Magazine Plug |
| 1594 | Carrier Spring Screw | 11994 | Magazine Plug Screw |
| 1694 | Cartridge Guide, RH | 11294 | Magazine Spring |
| 1794 | Cartridge Guide, LH | 13394 | Magazine Tube, Carbine, 19 1/4"OAL |
| 1894 | Cartridge Guide Screws (2 Required) | 10694 | Mainspring |
| 1994 | Extractor | 5594 | Mainspring Screw |
| 2094 | Extractor Pin | 5694 | Mainspring Strain Screw |
|
2194 |
Ejector | 14594 | Peep Sight Plug Screw |
| 2394 | Ejector Spring | 15194 | Rear Band, Carbine |
| 2494 | Ejector stop Pin | 15294 | Rear Band Screw, Carbine |
| 6294 | Finger Lever, Straight Grip | 7194 | Sear |
| 2894 | Finger Lever Pin | 7294 | Sear Pin |
| 2994 | Finger Lever Pin Stop Screw | 12970C | Sight Plug Screw (2 Required) |
| 3094 | Finger Lever Link Screw | 6994 | Spring Cover (sometimes referred to as the loading gate) |
| 2594 | Firing Pin | 7094 | Spring Cover Screw |
| 4094 | Firing Pin Striker | 7794 | Trigger |
| 4194 | Firing Pin Striker Stop Pin | 7394 | Trigger Stop Spring |
| 2094 | Firing Pin Stop Pin | 7494 | Trigger Stop Spring Screw |
| 8194 | Forearm, Carbine, Full Magazine | 7594 | Trigger Stop |
| 8794 | Front Band Screw, Carbine | 7694 | Trigger Stop Pin |
| 3794 | Friction Stud | 16494 | Upper Tang Screw |
| 3894 | Friction Stud Spring | 3281 | Front Sight Cover, Carbine |
| 3994 | Friction Stud Stop Pin | 103H | Front Sight, .260 High --carbine |
| 4294 | Hammer Stirrup | 103E | Front Sight, .310 High --carbine |
| 4394 | Hammer Stirrup Pin | 22-K | Rear Sight, Carbine |
| 4494 | Hammer Only | 3-C | Rear Sight Elevator |
| 4594 | Hammer Screw | 1-C | Rear Sight Elevator, (Original Style) |
| 4694 | Link | . | . |
|
older model 1894 obsolete rifles not listed above, see our parts listing |
|||
| 11694 | Magazine Plug, Full Magazine (Take-Down) | 14155 | Magazine Lever, 1/2 mag & model 55 (Take-Down) |
| 14194 | Magazine Lever (Take-Down) | 11855 | Magazine Plug 1/2 mag (Take-Down) |
| 14294 | Magazine Lever Screw (Take-Down) | 13255 | Magazine Tube, 1/2 Magazine (Take-Down) |
| 14394 | Magazine Lever Plunger (Take-Down) | .? | Finger Lever, 1/2 Pistol Grip |
| 14494 | Magazine Lever Plunger Spring (Take-Down) | 12194 | Magazine Ring - (rifle) |
| 12594 | Magazine Tube, Full Magazine (Take-Down) | 12394 | Magazine Ring Pin |
| 12294 | Magazine Ring (Take-Down) | 12494 |
Magazine Tube - rifle 30-30/44-40 (25 1/4") |
| .? | Barrel extension (Take-Down) | . | . |
For prices of parts that we do make for this model, click here for Link to Winchester 94 Parts
All information appearing on this page, Copyright © 1996-2007 Wisner's Inc.,
with credit given for original illustrations.
All Rights Reserved
Back to Exploded Views
Last Updated 03-05-2007
LeeRoy Wisner