Stevens model 44 Exploded Views

Stevens model 44 & 414

Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

The Above illustration taken from Frank de Haas Single Shot Rifles & Actions book with the numbers changed to match factory part numbers

Parts listed below in RED bold letters are the parts that we currently make & have for sale
other numbers are for identification purposes only.

0*	Barrel	17*	Frame
1	Barrel Screw	18	Hammer
2	Breech Block stripped	19	Hammer Screw
2A	Breech Block complete	20	Lever
3	Breech Block Pivot	25	Link
4	Breech Block Pivot Screw	26	Link Pin
5	Butt Plate	27	Mainspring, early "No Hole type"
6	Butt Plate Screw	28	Mainspring Screw
7	Dummy Screw	29	Trigger
8	Ejector 22 caliber only	30	Trigger Screw
12	Extractor, specify version (12-3-CW shown)	31	Trigger Spring
13	Firing Pin	32	Trigger Spring Screw
14	Firing Pin Screw	33	Stock with butt plate
15	Fore-end	34	Front Sight, Rocky Mtn, 44
16	Fore-end Screw	35	Rear Sight, Rocky Mtn, 44

For the mainsprings, there are 2 different ones depending on the vintage of the firearm. These are however are the same as & are shared with the Favorite model CLICK HERE FOR A LINK for a link to that page.

The parts listed below is an excerpt from our catalog showing the parts we make, with our assigned numbers.

44 early - side style	12-1-S	EXTRACTOR - 22 RF - .256 dia hole
44 - center style, wide	12 -2-CW	EXTRACTOR - unfitted - .290 dia hole
44 - center style, wide	12 -3-CW	EXTRACTOR - unfitted - .290 dia hole, angled 5 degree
44 - center style	8	EJECTOR ASSEMBLY - 22RF - plunger style .290 dia hole
44 / 44 1/2 late center style	13 -5-CS	EXTRACTOR - unfitted - .200 dia hole
44 / 44 1/2 late center style	13 -6-CS	EXTRACTOR - 22 RF - .200 dia hole
44, Early	12	MAINSPRING - (no screw hole) - (same as 1889 Favorite)
44, Intermediate	12B	MAINSPRING - (screw hole) - (same as 1894 Favorite)

For prices of parts that we do make for this model, click here for Link to Stevens 44 Parts

Due to the fact that original factory parts lists may not exist for all the types used on these firearms, our part numbers reflect the closest factory number we can find &/or with suffixes relating to our designated type, then either a side style, center style, wide top, or small hole

Type Factory # Description	Illustration	Our number
Type 1 #? Side Style, .256 dia. hole .142 wide Also called the 7 O'clock version		#12-1-S
Type 2 #12 Center style, .290 dia hole .150 wide bottom .250 wide top		#12-2-CW
Type 3 #? Center style, Same as type #3 except top section is bent to the rear 5 degrees		#12-3-CW
Type 4 #8 Center style, spring loaded plunger .290 dia hole, .237 wide 22 RF only		#8
Type 5 #13 Center style, .200 dia hole curved rear section, .250 wide. Same as model 44 1/2		#13-5-CS
Type 6 #? Center style same as type #5 except .200 wide. 22RF only Same as model 44 1/2		#13-6-CS