Stevens model 26
Crackshot
Actual load times may take a while as these scanned pictures may be large, &
depending on the speed of your computer & server
The Above illustration taken from Frank de Haas Single Shot
Rifles & Actions book but the numbers changed to match factory part numbers
Parts listed below
in RED
bold letters
are
the parts that we currently make & have for sale
other numbers are for
identification purposes only.
| 1A | Barrel without Sights | 17 | Hammer |
| 2A | Barrel Lug | 18 | Lever |
| 3 | Butt Plate | 19 | Lever Pin |
| 4 | Butt plate Screw | 20 | Lever Pin Roll |
| 5 | Breech Block 22 | 21 | Lever Pin Roll Screw |
| 6 | Breech Block 32 | 22 | Mainspring |
| 7 | Breech Block Screw | 23 | Mainspring Plunger |
| 8 | Breech Block Plunger | 24 | Mainspring Plunger Sleeve |
| 9 | Breech Block Plunger Spring | 25 | Stock & Butt Plate |
| 10-22 | Extractor 22 | 26 | Stock Bolt |
| 10-32 | Extractor 32 | 27 | Stock Bolt Nut |
| 11 | Frame | 28 | Take-Down Screw |
| 12 | Fore-end | 29 | Trigger |
| 13 | Fore-end Nut | 29A | Trigger Spring |
| 14 | Firing Pin | 30 | Trigger Screw |
| 15 | Firing Pin Pin | 31 | Sight (Front) |
| 16 | Hammer | 32 | Sight (Rear) |
For prices of parts that we do make for this model, click here for Link to Stevens 26 Crackshot Parts
All information appearing on this page, Copyright © 1996-2006 Wisner's Inc., with credit given for original illustrations. All Rights Reserved
Originated & Last Updated
08-09-2006
LeeRoy Wisner