Savage / Stevens Pump Shotguns
Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

The above illustration is for a Stevens 67D series

This firearm series had many changes reflected by different series.   The basic gun was the Savage model 30 which was more of a deluxe firearm usually utilizing a ventilated rib, takedown barrels & walnut wood.  The Stevens / Springfield guns usually were plain solid (non removable) barrels & had birch wood.   The early models had a  push button safety behind the trigger, while the later series utilized a top tang slider safety button.   It is about impossible to define all the variations in the small space available here.  Original firing pins were a single part, while the later ones used a 2 piece unit.  Operating slide handles & corresponding bars were changed about 3 times.

Parts listed below in RED are the parts that we currently make & have for sale 
other numbers are for identification purposes only.

For prices of parts that we do make for this model, click here for   Link to Savage/Stevens pump shotgun parts page

Savage 30 J  or Stevens 67 C  trigger unit (tang safety)	Savage 30 J  barrel takedown unit

We do not have any of the immediately above parts, these illustrations are for your information only

All information appearing on this page, Copyright © 1996-2007 Wisner's Inc., with credit given for original illustrations.  All Rights Reserved

     Back to Exploded Views     

Originated 02-03-06, Last Updated 03-22-2007
LeeRoy Wisner