Remington #1 & #5 Rolling Block
Actual load times may take a while as these scanned pictures may be large, &
depending on the speed of your computer & server
The Above illustration taken from Frank de Haas Single Shot
Rifles & Actions book with the numbers changed to match factory #5 part numbers
The #1 rifle was made as a military version, while the
sporting version was known as the #5. The 1902 7mm is closest to the
commercial #5 shown above. There will be differences between the many
military #1 variations, but most notable in the
firing pins & extractors
Parts listed below
in RED
bold letters
are
the parts that we currently make & have for sale
other numbers are for
identification purposes only.
| 4 | Frame | 23 | Sear Spring Screw |
| 5 | Guard | 25 | Mainspring Screw |
| 6 | Hammer | 26 | Tang Screw |
| 7 | Block | 29 | Hammer & Block Pin |
| 8 | Trigger | 30BT |
Firing Pin, Black Powder with retainer screw on Top |
| 9 | Lever | 30BB | Firing Pin, Black Powder with retainer pin/slot on Bottom |
| 14 | Extractor, 7mm, unfinished | 30S | Firing Pin, Smokeless Powder, (smaller tip) 7mm |
| 16 | Mainspring | 31 | Retractor Pin |
| 17 | Retractor | 33 | Trigger Pin |
| 18 | Sear & Lever Spring | 34 | Lever Pin |
| 20 | Side Screw | 35 | Mainspring Stop Pin |
For prices of parts that we do make for this model, click here for Link to Remington #1 Parts
All information appearing on this page, Copyright © 1996-2006 Wisner's Inc.,
with credit given for original illustrations.
All Rights Reserved
Back to Exploded Views
Originated & Last Updated
08-09-2006
LeeRoy Wisner