Colt "M" Pocket Model, Hammerless

Calibers 32 & 380 ACP,   models 1903 & 1908

Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

Above parts illustration taken from original an Colt parts list.

Parts listed
below in RED bold letters are the parts that we currently make & have for sale 
other numbers are for identification purposes only.

 1  Receiver  22  Plug
 2  Barrel (Specify Caliber)  24  Ejector
 3  Slide (Specify Caliber)  25  Ejector Pin
 4  Firing Pin, Front  26  Recoil Spring
 4a  Firing Pin, Rear  27-1  Recoil Spring Guide, complete ,Type 1
 5  Firing Pin Spring  27-2  Recoil Spring Guide, complete, Type 2
 6  Rear Sight  27-3  Recoil Spring Guide, complete, Type 3
 7  Firing Pin Lock Pin  28  Automatic Grip Safety
 8-1  Shell Extractor, early 32 cal, (single thickness)  29  Automatic Safety Pin
 8-2  Shell Extractor, late 32 & 380, (wider at hook)  30  Magazine Latch
 9  Shell Extractor Spring  31  Magazine  Complete
 10  Shell Extractor Pin  32  Magazine  Follower
 12  Hammer  33  Magazine  Spring
 13  Slide Lock Safety  34  Stocks
 14  Hammer Roll  35  Stock Screw
 15  Hammer Roll Pin  36  Safety Disconnector
 16  Trigger  37  Safety Disconnector Plunger
 17  Sear  38  Safety Disconnector Plunger Spring
 18  Safety  39  Safety Disconnector, Complete
 19  Sear & Safety Pin  40  Escutcheons, (set)
 20  Sear, Safety & Trigger Spring  41  Front Sight
 21  Main Spring . .

For prices of parts that we do make for this model, click here for Link to Colt M parts 

These guns were made essentially in 4 different versions, the early 32 caliber type 1, had a 4" barrel, barrel bushing, with no magazine disconnector up to s/n 71,999.  The type 2,  32 caliber used the barrel bushing but had a 3 3/4" barrel & made from 1908-1910 with s/n from 72,000 -105,051. 

Type 3, 32 caliber had no barrel bushing & 3 3/4" barrel made from 1910-1926 with s/n from 1056,051 - 468,096.  Type 4 32 calibers were the same as the type 3 but ad a magazine disconnector with s/n 468,097 - 572,214.   

The 380 caliber guns came into being in 1908 to 1940. Type 2, 380 had 3 3/4" barrels with barrel bushing were made from 1908-1910 with s/n 1-6,251.  Type 3, 380 had no barrel bushing & made from 1910-1926 with s/n from 6,252 - 92,893.   Type 4, 380 have a magazine disconnector, with s/n 92,894 - 134,499.

All information appearing on this page, Copyright © 1996-2008 Wisner's Inc., with credit given for original illustrations.  All Rights Reserved

            Back to Exploded Views  

Originated 11-04-05,Last Updated 07-13-2008
J Wisner